9.4.4.
S
TANDARD SETTINGS
This function clears the operating data of the machine and simultaneously resets the brake board
parameters to their default values. To access this menu, when the display shows:
press ENTER, the following message appears:
Press ENTER again to reset all parameters to their default values, or return to the upper menu level
by pressing CLEAR for a few seconds.
This function does not alter the language and the TV standard setting.
9.4.5.
L
OW KIT MENU
This function directly accesses the firmware of the brake board. To access this menu, when the
display shows:
press ENTER. This function is structured as follows:
9.4.5.1.
Low kit version
This function displays the brake board firmware version. To access this menu, when the display
shows:
press ENTER, the following message appears:
Which identifies the firmware version.
Pagina 9.28
SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
STANDARD SETTINGS ?
CONFIRM ?
LOW KIT MENU
LOW KIT MENU
LOW KIT VERSION
H:x L:x B:x
Low Kit Version
Low Kit fault code