First Power-On - Technogym Synchro Excite 500SP Service Maintenance Manual

5.4. FIRST POWER-ON

After completing the installation procedure, the machine is ready for use.
On the 500, 700 and 700WTV models, simply turn the on/off switch from position 0 to position 1,
while on the 500SP and 700SP models it is necessary to get on the machine and start pedaling.
On power-up the machine performs a self-test of the upper and lower assemblies. After completing
the self-test, the machine enters the stand by state, awaiting a command from the keyboard.
To check the correct operation of the machine:
• get on the machine;
• start exercising;
• check that the displayed speed varies accordingly;
• check that exercise resistance varies when the "+" and "-" effort level keys are pressed, or
the touch sensors on the 700, 700 SP and 700WTV models are pressed, and the effort level
change from 1 to 25;
• put on the heart rate meter and check that the machine correctly reads the heart rate value;
• only for 700, 700 SP and 700WTV: grasp the sensors and check that the machine correctly
reads the heart rate value.
• only for 700WTV: Carry out the procedure described in paragraph: 9.9. "Touch screen
calibration".
Pagina 5.4
SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0