Transferring The Tuning Data; Using The Tgs Key - Technogym Synchro Excite 500SP Service Maintenance Manual

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0

9.8. TRANSFERRING THE TUNING DATA

The TV and radio channel tuning data can be transferred from one machine to the other in 2 ways:
• using a TGS key;
• connecting two machines using a CSafe connection (recommended mode).
NOTE: In this way the channels will remain in the memory until the equipment is switched off
(RAM memory); to permanently memorise the changes (in EPROM) press SAVE IN EPROM
key.
9.8.1. U
SING THE
TGS
KEY
On the already tuned machine:
1. Enter the configuration menu of the channels that are to be
transferred.
2. Insert the TGS key into the reader on the machine;
3. Press the "SAVE IN TGS" button, this will cause all the channel
configuration data to be saved to the key.
Up to 45 channels can be memorised in the TGS key; if there are
more channels to be memorised, a message indicates the number of
TGS keys required. The TGS keys must be inserted one at the time
as requested by the messages, until all the channels have been
memorised.
4. Exit the menu by pressing the "HOME" key.
On the machine to be tuned:
1. Enter the configuration menu of the channels that need to be tuned.
2. Insert the TGS key to which the tuning data was saved.
3. Press the "READ TGS" button.
4. Save the data uploaded to the machine by pressing "SAVE IN
EEPROM".
5. Exit the menu by pressing the "HOME" key.
Page 9.45