File Location; Maintenance - FLIR Quasar Gen III User And Installation Manual

Configuration and Operation
Note:
This application is not the same as the Recording Schedule function. It is not used for recording live
video.
To create a new schedule or edit an existing schedule
1. Select the appropriate checkbox for the day(s) of the week (Sun, Mon, Tue, Wed, Thu, Fri and Sat)
to create a schedule.
2. Set Start time (for example, 09:00) and Duration (for example, 4:00 hours).
3. Click Save to apply the newly created schedule to the camera.
To remove a schedule
1. To remove a schedule, select the setup data line by line.
2. Click Delete to remove.
9.3.8

File Location

From the File Location page, specify a storage location for snapshots and web recordings. The default
setting is: C:\. After confirming the setting, click SAVE to save the snapshots and recordings in the
designated location.
Note:
1. Make sure the selected file path contains valid characters.
2. When using Windows 8 OS, the storage location cannot be C:\. You must define a storage
location that does not require Administrator privileges on the PC.
9.3.9

Maintenance

Clicking the Maintenance tab in the System screen opens a drop-down menu with the following tabs:
Log File User Information
70
File Location Screen
Factory Default Software Version
CP-6302 User and Installation Guide
Software Upgrade Parameters
September 7, 2017