Admin Password; Add User - FLIR Quasar Gen III User And Installation Manual

Admin Password

Change the administrator's password by entering the new password in both text boxes. The input
characters/numbers are displayed as dots for security purposes. After clicking SAVE, the web browser
asks the Administrator for the new password (maximum 14 digits).
Note:
The following characters are valid: A-Z, a-z, 0-9,!#$%&'-.@^_~.

Add user

The user name and passwords are limited to 14 characters. There is a maximum of 20 user accounts.
To add a new user
1. Type the new user name and password in the respective fields.
2. Select the appropriate check boxes to give the user Camera Control, Talk and Listen permissions.
·
I/O access – Basic functions that enable you to view video when accessing to the camera.
·
Camera control – Allows you to change camera parameters on the Camera tab.
·
Talk – Talk allows the user at the local site to talk from the remote site to the administrator
·
Listen – Listen allows the user at the local site to listen from the remote site to the
administrator.
3. Click ADD.
Manage User
·
To delete a user, select the User name drop-down list and select the user. Click DELETE to
remove the user.
·
To edit a user, select the User name drop-down list and select the user. Click EDIT to edit the
user's password and privileges.
Note:
You must enter the user password and also select the authorized function(s).
·
Click Save to modify the account credentials and privileges, or Close to discard changes.
September 7, 2017
Edit User Account Dialog Box
CP-6302 User and Installation Guide
Configuration and Operation
37