Install Upnp Components - FLIR Quasar Gen III User And Installation Manual

Appendices

10.3 Install UPnP Components

Follow the instructions below to enable UPnP so that the camera can be discovered and displayed in the
Network and Sharing Center.
To enable UPnP discovery
1. Click or
2. Click Network and Internet (Win 7, 8, or 8.1).
3. Click Network and Sharing Center (all OSs).
4. Click Change advanced sharing settings.
5. Expand the Home or Work node, select Turn on network discovery.
124
(Start) and select Control Panel.
Advanced Sharing Settings Screen
CP-6302 User and Installation Guide
September 7, 2017