Exposure Screen - FLIR Quasar Gen III User And Installation Manual

Configuration and Operation
9.6.1

Exposure Screen

The Exposure screen is used to configure lens settings and exposure modes. The exposure is the amount
of light received by the image sensor and is determined by the amount of exposure by the sensor (shutter
speed), and other exposure parameters.
Administrators may either allow the camera to automatically select an exposure level using a programmed
algorithm or choose the level themselves. The smaller the number (the higher the shutter speed) that the
administrator selects, the lower the exposure level and vice versa. The configurable settings depend on the
selected exposure mode.
Six exposure settings are available:
·
Auto Iris
·
P-Iris Priority
·
Iris Priority
·
Auto Shutter
·
Shutter Priority
·
Manual Mode
For each exposure setting, from the Max Gain drop-down menu, select Off, 1, 2, or 3.
98
CP-6302 User and Installation Guide
September 7, 2017