Misc. Screen - FLIR Quasar Gen III User And Installation Manual

·
Light Sensor – IR LEDs are turned on or off depending on the light sensor.
·
Light On – Activates IR mode (puts camera into monochrome/Night mode). The IR LEDs are
continuously illuminated.
·
Light Off – Deactivates IR mode (puts camera into color/Day mode). The IR LEDs are continuously
off.
·
Smart – Smart mode enhances monochrome/Night mode stability when IR illumination is dominant
and keeps the camera from switching between Day and Night modes. In this mode, the camera
decides when to remove the IR Cut filter. When the IR Cut filter is on (i.e. monochrome/Night
mode), the IR LED illuminator also is activated. This prevents the camera from returning to
color/Day mode.
Day/Night Threshold
Set the threshold at which you want to activate the IR function. The setting is applied automatically.
·
For the daytime to nighttime threshold
where 1 is darker and 9 is brighter, or select Dark er or Brighter. The default setting is 7.
·
For the nighttime to daytime threshold
where 1 is darker and 9 is brighter, or select Dark er or Brighter. The default setting is 3.
IR Compensation
From the drop-down list, set the IR Compensation to On or Off. Setting IR Compensation to On
compensates for the reflection of infrared light emitted from the camera onto reflective objects, thus
improving image sharpness and definition. Without IR compensation, objects may appear blurred. The
default setting is On. The setting is applied automatically.
9.6.5

Misc. Screen

The Misc. screen is used for enabling Digital Zoom and setting the TV System, which determines if other
functions can be enabled.
·
When the selected TV System is 50 fps (PAL) or 60 fps (NTSC), only the Digital Zoom can be
enabled. The unit operates with digital WDR.
·
When the selected TV System is WDR 2 Shutter (PAL) or WDR 2 Shutter (NTSC) and WDR
Function is enabled (On) in the
Stabilizer and True (Multi-Shutter) WDR. The unit's frame rate is 25/30 fps in this mode.
September 7, 2017
, from the drop-down list, select a number between 1-9,
, from the drop-down list, select a number between 1-9,
Advanced Picture Settings
Misc. Screen with True (Multi-Shutter )WDR Enabled
CP-6302 User and Installation Guide
Configuration and Operation
screen, you can enable the Image
107