DC3 n (Valid in CBM1000II-Compatible Mode)
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[Sample Program]
[Print Results]
Specifies/cancels printing in red (black-based paper)
<13>H<n>
0
n
255
Specifies or cancels printing in red.
• Red printing is valid on black-based thermal paper. Specifies or cancels printing in
black on red-based thermal paper.
• "n" is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
Black-based Paper
0
Cancels red printing
1
Specifies red printing
• Valid when 2-color paper is specified by the ESC ( E command.
• Valid only at the top of a line.
• Valid only when dedicated thermal paper is used.
• This command must not be used for normal thermal paper.
• Conducting pulse amount after cancellation is standard value. At the time of setting,
conducting pulse amount is increased to change the coloring.
n = 0
LPRINT CHR$(&H1B);"~";"J";CHR$(1);
LPRINT "AAAAA";CHR$(&HA);
LPRINT CHR$(&H1B);"~";"J";CHR$(0);
LPRINT "AAAAA";CHR$(&HA);
Red printing
AAAAA
AAAAA
Black printing
* When dedicated thermal paper (black-based paper) is used.
Function
— 27 —
Red-based Paper
Cancels black printing
Specifies black printing