Ff （At Selection Of Page Mode; Ff （Valid Only For Black Mark Specification - Citizen BD2-2220 Command Reference Manual

FF （At selection of PAGE MODE）
support model
[Function] Printing in PAGE MODE and returning to STANDARD MODE (at the selection of PAGE MODE)
[Code]
<0C>H
[Outline] [The specification which is common to the model]
Executes a batch printout of the data mapped in the entire print area, and then returns to
STANDARD MODE.
[Caution] • All mapped data is erased after printout.
• The print area set up by ESC W is initialized.
• This command does not execute a paper cut.
• After this command is executed, the beginning of the line is taken as the start position for the next
print.
• This command is only effective when the PAGE MODE is selected.
CT-S4000
• When selecting BM paper or label paper to specify the PAGE MODE, data extended to all
printing area is printed in batch. After returning to the STANDARD MODE, setting the
start position of next label is carried out.
[See Also] Appendix 5.1.4 "Example of Using PAGE MODE"
ESC FF、ESC L、ESC S
FF （valid only for Black mark specification）
support model
[Function] At selection of Black mark paper (valid only for Black mark specification)
[Outline] [The specification which is common to the model]
This command prints the data in the printer buffer and searches for the head of the next Black mark
(Black mark position)
[Caution] • This command does not execute a paper cut.
• After this command is executed, the beginning of the line is taken as the start position for the next
print.
• Valid only for label- or BM-supported model.
(Please confirm specifications for the details.)
[See Also] GS FF
CT-S280 CT-S300
PMU2XXX
CT-S280 CT-S300
PMU2XXX
CT-S2000 CT-S4000
CT-S2000 CT-S4000
- 33 -
BD2-2220 CT-S310
BD2-2220 CT-S310