63 F Selecting The Font Of Hri Characters; 64 H Selecting The Bar Code Height - Citizen CBM-262 User Manual

Chapter 7 Print Control Codes
(63) Selecting the font of HRI characters (GS f n)
Code: [1D] h + [66] h + n
* (0 n 1, 30
This command selects the font of HRI characters when printing a bar code.
• n has the following meanings.
• The initial value is "n = 0".
(64) Selecting the bar code height (GS h n)
Code: [1D] h + [68] h + n
* (1 n FF) Data are expressed in Hex code.
This command selects the bar code height.
• n indicates the number of dots in the vertical direction.
• The initial value is "n = A2".
7
100
n 31) Data are expressed in Hex code.
n(Hex) Font
0, 30 Font A
1, 31 Font B