Kärcher Puzzi 8/1 C Unit Information page 22

Basic settings and service procedures
Water pump
6
1
1 Rubber mounts (2x), water pump
2 Water pump (M2)
3 Hose clamp
4 Fresh-water hose to the spray/suction
hose
5 Holder, water pump
6 Water hose from fresh-water tank
Page 22 / 29
Removing the water pump
– Remove floor cover (see Page 19).
– Remove water pump (2) with the rubber
mounts (1) from the holder (5).
– Remove hose clamp (3).
– Pull hoses (4, 6) off the water pump (2).
– Remove rubber mount (1) from the water pump.
– Install new water pump in reverse order.
New Unit Information 05.2007
Puzzi 8/1 C
1
2
3
4
5