Table of Contents
Advertisement
Figure 24. System fan removal
Step 1.
Grasp the fan tabs on both ends of the system fan.
Step 2.
Lift the system fan out of the server.
After removing the system fan, complete the following steps:
1. Install a new system fan. See "Install a system fan" on page 58.
2. If you are instructed to return the old system fan, follow all packaging instructions and use any
packaging materials that are provided.
Install a system fan
Use this information to install a system fan. You can install a hot-swap fan without powering off the server,
which helps you avoid significant interruption to the operation of the system.
"Read the
installation
Guidelines" on
page 39
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
58
User Guide for ThinkAgile HX2320 Appliance and HX2321 Node
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 41
Advertisement
Table of Contents
