Install The Rack Latches - Lenovo ThinkSystem SR645 Maintenance Manual
Hide thumbs
Also See for ThinkSystem SR645:
- Setup manual (188 pages) ,
- System manual (50 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Install the rack latches
Use this information to install the rack latches.
About this task
Attention: Read Installation Guidelines to ensure that you work safely.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DY1RaWHYM4xDloAwuBQHR0
• Youku:
http://list.youku.com/albumlist/show/id_52339628
Procedure
Step 1.
Touch the static-protective package that contains the rack latches to any unpainted surface on the
outside of the server. Then, take the rack latches out of the package and place them on a static-
protective surface.
Step 2.
On each side of the server, align the rack latch with the pin on the chassis. Then, press the rack
latch onto the chassis and slightly slide it forward as shown.
Figure 99. Rack latch installation
ThinkSystem SR645 Maintenance Manual
204
Advertisement
Chapters
Table of Contents
