Example; Allocation Of Function Keys With The Lokprogrammer - Esu LokPilot V4.0 Instruction Manual

Function outputs
Conditions
Line Description
block
1 FS, fwd Stand, Forward
2 FS, rev Stand, Backward
3 FF, fwd Fahrt, Forward
4 FF, rev Fahrt, Backward
5 F0, fwd Light Key, Forward
6 F0, rev Light Key, Backward Rear light
7 F1, fwd Key F1, Forward
8 F1, rev Key F1, Backward
9 F2, fwd Key F2, Forward
10 F2, rev Key F2, Backward
11 F3, fwd Key F3, Forward
12 F3, rev Key F3, Backward
13 F4, fwd Key F4, Forward
14 F4, rev Key F4, Backward
15 F5, fwd Key F5, Forward
16 F5, rev Key F5, Backward
17 F6, fwd Key F6, Forward
18 F6, rev Key F6, Backward
19 F7, fwd Key F7, Forward
20 F7, rev Key F7, Backward
21 F8, fwd Key F8, Forward
22 F8, rev Key F8, Backward
23 F9, fwd Key F9, Forward
24 F9, rev Key F9, Backward
25 F10, fwd Key F10, Forward
26 F10, rev Key F10, Backward
27 F11, fwd Key F11, Forward
28 F11, rev Key F11, Backward
29 F12, fwd Key F12, Forward
30 F12, rev Key F12, Backward
31 F13, fwd Key F13, Forward
32 F13, rev Key F13, Backward
Standard mapping
LokPilot V4.0 (micro)
Physical
Logic function
outputs
Head light
AUX1[1]
AUX1[1]
AUX2[1]
AUX2[1]
Shunting mode
Shunting mode
Acceleration
Acceleration

12.2.3.1 Example

Example: Switching AUX3 with F8. Assuming you have a LokPilot
V4.0 decoder and you want to switch AUX 3 with the button F8
subject to direction of travel. With the help of the ESU adapter
board 51968 you added a light bulb to AUX 3.
A glance at the table "Standard mapping LokPilot V4.0" on page
55 shows that nothing has to be changed in the input block. F8
has already been entered in mapping row 14.
As per the table in chapter 12.2.2.2., we must set the first CV
of the block to 16 in order to activate AUX3. From the overview
table on page 42 we determine that this must be CV 474 (Index
2). Therefore we first must set CV 32 to value 2 and then CV 474
to the value of 16.
For this example to work the AUX3 output must also be switched
on. This is explained in chapter 12.3.

12.2.4. Allocation of function keys with the LokProgrammer

Figure 27: Screenshot LokProgrammer, Function mapping
55