Physical Function Outputs - Esu LokPilot V4.0 Instruction Manual

Function outputs
Control CV E Key F14 is On
Key F14 is Off
Key F15 is On
Key F15 is Off
Key F16 is On
Key F16 is Off
Key F17 is On
Key F17 is Off
Control CV F Key F18 is On
Key F18 is Off
Key F19 is On
Key F19 is Off
Key F20 is On
Key F20 is Off
Key F21 is On
Key F21 is Off
Control CV G Key F22 is On
Key F22 is Off
Key F23 is On
Key F23 is Off
Key F24 is On
Key F24 is Off
Key F25 is On
Key F25 is Off
Control CV H Key F26 is On
Key F26 is Off
Key F27 is On
Key F27 is Off
Key F28 is On
Key F28 is Off
Wheel sensor is On
Wheel sensor is Off
52
1 Control CV I
2
4
8
16
32
64
128
1
2
The value to be written into each control CV is easily established:
simply add the values of the desired conditions.
4
8
Example: You want F0 to be switched on while the locomotive is
16
stationary and set to direction forward and while F4 is switched
32
off. Therefore you write the value 4 + 16 = 20 into the control CV
64 A and the value 32 into the control CV B. All other CVs remain on
128
0. Thus these conditions are ignored. The previous table shows
into which CVs you have to write the values.
1
2
The input block for the first mapping row lies between CV 257
4
(control CV A) and CV 265 (control CV I).
8
LokPilot V4.0 decoders support 5 sensor inputs. The wheel sensor,
16
though, is only available on LokPilot V4.0 and LokPilot V4.0 M4.
32
In addition to the inputs mentioned before sensor inputs 1 and 2
64
are available on LokPilot XL V4.0. Physically there are no sensors
128
on LokPilot micro V4.0. Nevertheless you can use them in mapping
1
because these sensors could be on add-on circuit boards (e.g.: as is
2
the case in the locomotives of the ESU Engineering Edition).
4

12.2.2.2. Physical function outputs

8
16 Physical function outputs are outputs that are actually built into
32
the decoder where you can connect "real" loads by means of
wires. Up to 8 outputs are conceivable.
64
128
The decoders are equipped as follows:
Sensor 1 is On
Sensor 1 is Off
Sensor 2 is On
Sensor 2 is Off
Sensor 3 is On
Sensor 3 is Off
Sensor 4 is On
Sensor 4 is Off
1
2
4
8
16
32
64
128