Esu LokPilot V4.0 Instruction Manual page 72

List of all supported CVs (DCC decoders)
CV Name
124 Extended Configuration #2
125 Starting voltage Analog DC
126 Maximum speed Analog DC
127 Starting voltage AC
128 Maximum speed Analog AC
132 Grade Crossing Hold Time
246 Automatic decoupling
Driving speed
247 Decoupling - Removing time
248 Decoupling - Pushing time
253 Constant brake mode
254 Constant braking distance
72
Description
Additional important settings for decoders.
Bit Description
0 Bi-directional bit: Enable driving direction when shifting
direction.
Disable driving direction.
1 Disable decoder lock with CV 15 / 16
Enable decoder lock with CV 15 / 16
3 Disable serial protocol for C-Sinus
Enable serial protocol for C-Sinus
4 Adaptive regulation frequency
Constant regulation frequency
(not for LokPilot Fx V4.0)
(not for LokPilot Fx V4.0)
(not for LokPilot V4.0 DCC and LokPilot Fx V4.0)
(not for LokPilot V4.0 DCC and LokPilot Fx V4.0)
Grade Crossing holding time. See chapter 12.3.3.
Geschwindigkeit, mit der die Lok beim Entkuppeln fährt. Je größer der Wert,
desto schneller die Lok. Der Wert 0 schaltet die automatische Entkupplung ab.
Automatisches Entkuppeln nur aktiv, wenn der Funktionsausgang auf „Pulse" oder
„Kuppler" gestellt ist.
This value multiplied with 0.016 defines the time the loco needs for moving away
from the train (automatic decoupling).
This value multiplied with 0.016 defines the time the loco needs for pushing against
the train (automatic decoupling).
Determines the constant brake mode. Only active, if CV254 > 0
Funktion
CV 253 = 0: Decoder stops linearly
CV 253 > 0: Decoder stops constantly linear
A value > 0 determines the way of brake distance it adheres to, independent from
speed.
Range Value
- 0
Value
1
0
0
2
0
8
0
16
0-255 30
0-255 130
0-255 50
0-255 150
0 - 255 0
0 – 255 0
0 – 255 0
0 – 255 0
0 – 255 0