Virtual Driving Sound; Standard Mapping Lokpilot V4.0 / Micro Decoder - Esu LokPilot V4.0 Instruction Manual

Function outputs
In addition there are three functions which influence the func-
tionality of physical function outputs. They work together with
various lighting effects of the physical outputs. You find more info
in chapter 12.3.
• Fire box: if set, an LED simulating the fire box varies the bright-
ness.
• Dimmer: if set, all outputs are dimmed to about 60% darker pro-
vided the outputs have been set to "Dimming down".
• Grade crossing: sets the grade crossing function for the appropri-
ately configured outputs for American models.
As is the case with the physical outputs the logical outputs are also
represented by two CVs in the mapping row. The arrangement
within the CVs is as follows:
Name Description
Control CV M Switching off acceleration and braking
deceleration
Shunting mode
Dynamic brakes
Fire box
Dimmer (low beam headlights)
Grade crossing
Reserved
Reserved
Control CV N Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Shift mode
54
You must add the value for the control CV for each output you
wish to switch. Into which CVs exactly you must write these val-
ues you can find in the overview table on page 42. For mapping
row 1 they are, for instance, CVs 268 (control CV M) and CV 269
(control CV N).
12.2.2.4. „Virtual driving sound"
If desired, the LokPilot V4.0 is able to delay the start of the loco:
the loco will just start driving when the time set in CV 252 (resolu-
tion: 65ms) has run out. This serves the synchronisation of locos
equipped with LokSound decoders and run with advanced con-
sisting.
However, the delay should only be active when the sound function
of the LokSound decoder is enabled. This is what the „Virtual driv-
ing sound" is for: Just map this fuction to a key of your choice to
Value
switch the sound (and thus the delay) virtually on and off.
1
Name
2
Control CV O
4
8
16

12.2.3. Standard mapping LokPilot V4.0 / micro Decoder

32
Both decoders - LokPilot V4.0 and LokPilot micro V4.0 – have iden-
64
tical function mapping.
128
1
2
4
8
16
32
64
128
Description
Soundslot 1 („Virtual driving sound") 1
Value