Conditions Block - Esu LokPilot V4.0 Instruction Manual

Function outputs
All desired actions to be carried out by the decoder are saved in
an internal table. Let´s first have a look at the principal structure
as it is shown in the chart on the next page. Two main groups
can be seen:
• The input block (conditions block) shows which condition is re-
quired to achieve a certain output. Conditions are for instance "F3
On" or "Locomotive is stationary with direction set to forward,
and F8 is switched on".
• In the output block it is shown what action must be carried out
when the condition(s) is/are met. This could be, for instance,
switching a function output.
The table always has 32 entries, the so called "mapping rows".
The decoder works continuously through this table from top to
bottom (row 1 to 32) and checks for each mapping row if the
conditions set in the input block are met. ONLY THEN the decoder
looks at the desired activities in the output block and carries them
out. After that it jumps to the next row and once it has reached
the bottom row it starts from the top again. This occurs several
100 times per second.
The conditions of each block are stored in CVs. There are 9 CVs
per mapping row reserved for the input block and 5 CVs for the
output block. The respective CVs responsible for each mapping
row are listed in the table. These CVs are numbered from "A" to
"N" and are called control CVs.
Since all CVs are within the index area the appropriate value for
CV 32 is also listed. Prior to changing any CVs you should ascertain
that the index CV 31 is set to 16 and CV32 to the value shown
in the table.

12.2.2.1. Conditions block

Each condition block of each mapping row consists of 9 control
CVs. Each CV defines four conditions.
Name Description
Control CV A Loco drives
Loco stops
Direction is forward
Direction is backward
Key F0 is On
Key F0 is Off
Key F1 is On
Key F1 is Off
Control CV B Key F2 is On
Key F2 is Off
Key F3 is On
Key F3 is Off
Key F4 is On
Key F4 is Off
Key F5 is On
Key F5 is Off
Control CV C Key F6 is On
Key F6 is Off
Key F7 is On
Key F7 is Off
Key F8 is On
Key F8 is Off
Key F9 is On
Key F9 is Off
Control CV D Key F10 is On
Key F10 is Off
Key F11 is On
Key F11 is Off
Key F12 is On
Key F12 is Off
Key F13 is On
Key F13 is Off
Value
1
2
4
8
16
32
64
128
1
2
4
8
16
32
64
128
1
2
4
8
16
32
64
128
1
2
4
8
16
32
64
128
51