Esu LokPilot V4.0 Instruction Manual page 4

Content
11.1.2.6 Adaptive Regulation Frequency ............................47
11.1.3. Automatic calibration of the motor ........................47
11.2. Turning off Load Compensation ................................47
11.3. Adapting Load Control Frequency .............................47
11.4. Dynamic Drive Control: Up and Down the Hill...........47
11.5. Settings for the C-Sinus motor ..................................48
12. Function outputs .................................................. 49
12.1. Physical function outputs ..........................................49
12.2. Allocation of function buttons (Function Mapping) ...49
12.2.1. Index CV access .....................................................49
12.2.2. Function Mapping chart .........................................49
12.2.2.1. Conditions block .................................................51
12.2.2.2. Physical function outputs ....................................52
12.2.2.3. Logical outputs ...................................................53
12.2.2.4. „Virtual driving sound" .......................................54
12.2.3. Standard mapping LokPilot V4.0 / micro Decoder ..54
12.2.3.1 Example ...............................................................55
12.2.4. Allocation of function keys with the LokProgrammer 55
12.3. Special Effects on function outputs ...........................58
12.3.1. Switching on outputs and different options ...........58
12.3.2. Adjusting effects desired ........................................59
12.3.3. Grade Crossing holding time..................................60
12.3.4. Flash rate ...............................................................60
12.3.5. Automatic Switch-off .............................................60
12.3.6. Switch-on and switch-off delay ..............................61
12.3.7. Digital couplers ......................................................61
12.3.7.1. „Coupler" mode ..............................................61
12.3.7.2. Automatic Coupler Function (Removing/Pushing) 61
12.3.8. Servo settings ........................................................61
12.3.8.1. Servo with coupler function ................................62
12.4. Analogue settings .....................................................62
12.5. LGB® Pulse Sequence Mode .....................................62
12.6. Swiss Head Light Mode .............................................63
13. Decoder Reset ...................................................... 63
13.1. With DCC Systems or 6020/6021 .............................63
13.2. With Märklin® systems (mfx® decoders) ..................63
4
13.3. With the ESU LokProgrammer ...................................63
14. Special Functions .................................................. 64
14.1. Directional Bit ...........................................................64
14.2. Saving the status of functions ...................................64
15. RailCom® .............................................................. 64
15.1. RailComPlus® ...........................................................65
15.1.1. Prerequisites for RailComPlus® ..............................65
16. Firmware Update ................................................. 65
17. Accessories ........................................................... 65
17.1. Change over skis .......................................................65
17.2. HAMO magnets ........................................................65
17.3. Wire harnesses with 8-pole or 6-pole socket .............66
17.4. Mounting adapter 21MTC ........................................66
18. Support and Assistance ....................................... 66
19. Technical data ....................................................... 67
20. List of all supported CVs ..................................... 68
20.1. DCC decoders ...........................................................68
21. Appendix .............................................................. 73
21.1. Programming long addresses ....................................73
21.1.1. Write address .........................................................73
21.1.2. Read out address ...................................................73
22. Warranty Certificate ........................................... 75