Vmps Configuration Example - Cisco Catalyst 3750 Software Configuration Manual

Configuring VMPS

VMPS Configuration Example

Figure 10-5
dynamic-access ports. In this example, these assumptions apply:
•
•
•
•
•
Figure 10-5 Dynamic Port VLAN Membership Configuration
station 1
station 2
Catalyst 3750 Metro Switch Software Configuration Guide
10-34
shows a network with a VMPS server switch and VMPS client switches with
The VMPS server and the VMPS client are separate switches.
The Catalyst 6500 series Switch A is the primary VMPS server.
The Catalyst 6500 series Switch C and Switch J are secondary VMPS servers.
End stations are connected to the clients, Switch B and Switch I.
The database configuration file is stored on the TFTP server with the IP address 172.20.22.7.
Primary VMPS
Server 1
Dynamic-access port
End
Catalyst 6500 series
Secondary VMPS
Server 2
Switch D
Switch E
Switch F
Switch G
Switch H
Dynamic-access port
End
Catalyst 6500 series
Secondary VMPS
Server 3
Catalyst 6500 series switch A
172.20.26.150
Client switch B
172.20.26.151
Trunk port
Switch C
172.20.26.152
172.20.26.153
172.20.26.154
172.20.26.155
172.20.26.156
172.20.26.157
Client switch I
172.20.26.158
Trunk port
172.20.26.159
Switch J
Chapter 10 Configuring VLANs
TFTP server
Router
172.20.22.7
78-15870-01