Extracting A Tar File; Displaying The Contents Of A File - Cisco Catalyst 3750 Software Configuration Manual

Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
This example shows how to display only the image-tv0-mz-121/html directory and its contents:
Switch# archive tar /table flash:image-tv0-m.tar image-tv0-mz-121/html
image-tv0-mz-121/html/ (directory)
image-tv0-mz-121/html/foo.html (0 bytes)

Extracting a tar File

To extract a tar file into a directory on the flash file system, use this privileged EXEC command:
archive tar /xtract source-url flash:/file-url [dir/file...]
For source-url, specify the source URL alias for the local file system. These options are supported:
•
•
•
•
The tar-filename.tar is the tar file from which to extract files.
For flash:/file-url [dir/file...], specify the location on the local flash file system into which the tar file is
extracted. Use the dir/file... option to specify an optional list of files or directories within the tar file to
be extracted. If none are specified, all files and directories are extracted.
This example shows how to extract the contents of a tar file located on the TFTP server at 172.20.10.30.
This command extracts just the new-configs directory into the root directory on the local flash file
system. The remaining files in the saved.tar file are ignored.
Switch# archive tar /xtract tftp:/172.20.10.30/saved.tar flash:/new-configs

Displaying the Contents of a File

To display the contents of any readable file, including a file on a remote file system, use the more [/ascii
| /binary | /ebcdic] file-url privileged EXEC command:
This example shows how to display the contents of a configuration file on a TFTP server:
Switch# more tftp://serverA/hampton/savedconfig
!
! Saved configuration on server
!
version 11.3
service timestamps log datetime localtime
service linenumber
service udp-small-servers
service pt-vty-logging
!
<output truncated>
78-15870-01
For the local flash file system, the syntax is
flash:
For the FTP, the syntax is ftp:[[//username[:password]@location]/directory]/tar-filename.tar
For the RCP, the syntax is rcp:[[//username@location]/directory]/tar-filename.tar
For the TFTP, the syntax is tftp:[[//location]/directory]/tar-filename.tar
Catalyst 3750 Metro Switch Software Configuration Guide
Working with the Flash File System
B-7