Managing The System Time And Date - Cisco Catalyst 3750 Software Configuration Manual

Metro switch

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Administering the Switch

This chapter describes how to perform one-time operations to administer the Catalyst 3750 Metro

This chapter consists of these sections:

Managing the System Time and Date

You can manage the system time and date on your switch using automatic configuration, such as the

Network Time Protocol (NTP), or manual configuration methods.

For complete syntax and usage information for the commands used in this section, refer to the Cisco IOS

Configuration Fundamentals Command Reference for Release 12.1.

This section contains this configuration information:

Managing the System Time and Date, page 5-1

Configuring a System Name and Prompt, page 5-15

Creating a Banner, page 5-18

Managing the MAC Address Table, page 5-20

Managing the ARP Table, page 5-26

Understanding the System Clock, page 5-2

Understanding Network Time Protocol, page 5-2

Configuring NTP, page 5-4

Configuring Time and Date Manually, page 5-11

C H A P T E R

Catalyst 3750 Metro Switch Software Configuration Guide