Cisco Catalyst 3750 Software Configuration Manual page 87

Chapter 4 Configuring IE2100 CNS Agents
Table 4-1
Device
DHCP server
TFTP server
IE2100 Configuration Registrar
Note For more information about running the setup program and creating templates on the Configuration
Registrar, refer to the Cisco Intelligence Engine 2100 Series Configuration Registrar Manual.
78-15870-01
Prerequisites for Enabling Automatic Configuration (continued)
Required Configuration
•
•
•
•
•
•
•
Create one or more templates for each type of device, and map the
configID of the device to the template.
IP address assignment
TFTP server IP address
Path to bootstrap configuration file on the TFTP server
Default gateway IP address
Create a bootstrap configuration file that includes the CNS
configuration commands that enable the switch to
communicate with the IE2100 Configuration Registrar.
Configure the switch to use either the switch MAC address or
the serial number (instead of the default host name) to
generate the configID and eventID.
Configure the CNS event agent to push the configuration file
to the switch.
Catalyst 3750 Metro Switch Software Configuration Guide
Configuring CNS Embedded Agents
4-7