Cisco Catalyst 3750 Software Configuration Manual page 694

Configuring Protocol-Independent Features
Command
Step 12 set dampening halflife reuse suppress
max-suppress-time
Step 13
set local-preference value
Step 14
set origin {igp | egp as | incomplete}
Step 15 set as-path {tag | prepend as-path-string}
Step 16
set level {level-1 | level-2 | level-1-2 | stub-area |
backbone}
Step 17
set metric metric value
Step 18 set metric bandwidth delay reliability loading mtu
Step 19
set metric-type {type-1 | type-2}
Step 20
set metric-type internal
Step 21 set weight
Step 22 end
Step 23 show route-map
Step 24
copy running-config startup-config
To delete an entry, use the no route-map map tag global configuration command or the no match or no
set route-map configuration commands.
You can distribute routes from one routing domain into another and control route distribution.
Catalyst 3750 Metro Switch Software Configuration Guide
28-92
Chapter 28
Purpose
Set BGP route dampening factors.
Assign a value to a local BGP path.
Set the BGP origin code.
Modify the BGP autonomous system path.
Set the level for routes that are advertised into the
specified area of the routing domain. The stub-area and
backbone are OSPF NSSA and backbone areas.
Set the metric value to give the redistributed routes (for
any protocol except IGRP or EIGRP). The metric value is
an integer from -294967295 to 294967295.
Set the metric value to give the redistributed routes (for
IGRP or EIGRP only):
• bandwidth—Metric value or IGRP bandwidth of the
route in kilobits per second in the range 0 to
4294967295
delay—Route delay in tens of microseconds in the
•
range 0 to 4294967295.
reliability—Likelihood of successful packet
•
transmission expressed as a number between 0 and
255, where 255 means 100 percent reliability and 0
means no reliability.
• loading— Effective bandwidth of the route expressed
as a number from 0 to 255 (255 is 100 percent
loading).
• mtu—Minimum maximum transmission unit (MTU)
size of the route in bytes in the range 0 to
4294967295.
Set the OSPF external metric type for redistributed routes.
Set the multi-exit discriminator (MED) value on prefixes
advertised to external BGP neighbor to match the IGP
metric of the next hop.
Set the BGP weight for the routing table. The value can
be from 1 to 65535.
Return to privileged EXEC mode.
Display all route maps configured or only the one
specified to verify configuration.
(Optional) Save your entries in the configuration file.
Configuring IP Unicast Routing
78-15870-01