Cisco Catalyst 3750 Software Configuration Manual page 648

Configuring BGP
Table 28-10 Default BGP Configuration (continued)
Feature
IP prefix list
Multi exit discriminator (MED)
Neighbor
Route reflector
Synchronization (BGP and IGP)
Table map update
Timers
Catalyst 3750 Metro Switch Software Configuration Guide
28-46
Default Setting
None defined.
Always compare: Disabled. Does not compare MEDs for paths from neighbors in
different autonomous systems.
Best path compare: Disabled.
MED missing as worst path: Disabled.
Deterministic MED comparison is disabled.
These are default neighbor settings:
• Advertisement interval: 30 seconds for external peers; 5 seconds for internal peers.
Change logging: Enabled.
•
Conditional advertisement: Disabled.
•
Default originate: No default route is sent to the neighbor.
•
Description: None.
•
• Distribute list: None defined.
• External BGP multihop: Only directly connected neighbors are allowed.
• Filter list: None used.
• Maximum number of prefixes received: No limit.
• Next hop (router as next hop for BGP neighbor): Disabled.
Password: Disabled.
•
Peer group: None defined; no members assigned.
•
Prefix list: None specified.
•
Remote AS (add entry to neighbor BGP table): No peers defined.
•
• Private AS number removal: Disabled.
• Route maps: None applied to a peer.
• Send community attributes: None sent to neighbors.
• Shutdown or soft reconfiguration: Not enabled.
• Timers: keepalive: 60 seconds; holdtime: 180 seconds.
Update source: Best local address.
•
Version: BGP version 4.
•
Weight: Routes learned through BGP peer: 0; routes sourced by the local router:
•
32768.
None configured.
Enabled.
Disabled.
Keepalive: 60 seconds
Holdtime: 180 seconds.
Chapter 28 Configuring IP Unicast Routing
78-15870-01