Displaying Etherchannel, Pagp, And Lacp Status - Cisco Catalyst 3750 Software Configuration Manual

Chapter 27 Configuring EtherChannels
Beginning in privileged EXEC mode, follow these steps to configure the LACP port priority. This
procedure is optional.
Command
Step 1 configure terminal
Step 2
interface interface-id
Step 3
lacp port-priority priority
Step 4 end
Step 5 show running-config
or
show lacp [channel-group-number]
internal
Step 6
copy running-config startup-config
To return the LACP port priority to the default value, use the no lacp port-priority interface
configuration command.

Displaying EtherChannel, PAgP, and LACP Status

To display EtherChannel, PAgP, and LACP status information, use the privileged EXEC commands
described in
Table 27-4 Commands for Displaying EtherChannel, PAgP , and LACP Status
Command
show etherchannel [channel-group-number {detail |
port | port-channel | protocol | summary}] {detail |
load-balance | port | port-channel | protocol |
summary}
show pagp [channel-group-number] {counters |
internal | neighbor}
show lacp [channel-group-number] {counters |
internal | neighbor}
You can clear PAgP channel-group information and traffic counters by using the clear pagp
{channel-group-number counters | counters} privileged EXEC command.
You can clear LACP channel-group information and traffic counters by using the clear lacp
{channel-group-number counters | counters} privileged EXEC command.
For detailed information about the fields in the displays, refer to the command reference for this release.s
78-15870-01
Purpose
Enter global configuration mode.
Specify the port to be configured, and enter interface configuration
mode.
Configure the LACP port priority.
For priority, the range is 1 to 65535. The is 32768. The lower the value,
the more likely that the port will be used for LACP transmission.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Table 27-4:
Description
Displays EtherChannel information in a brief, detailed, and
one-line summary form. Also displays the load-balance or
frame-distribution scheme, port, port-channel, and protocol
information.
Displays PAgP information such as traffic information, the
internal PAgP configuration, and neighbor information.
Displays LACP information such as traffic information, the
internal LACP configuration, and neighbor information.
Displaying EtherChannel, PAgP, and LACP Status
Catalyst 3750 Metro Switch Software Configuration Guide
27-19