Copying Configuration Files By Using Ftp; Preparing To Download Or Upload A Configuration File By Using Ftp - Cisco Catalyst 3750 Software Configuration Manual

Working with Configuration Files

Copying Configuration Files By Using FTP

You can copy configuration files to or from an FTP server.
The FTP protocol requires a client to send a remote username and password on each FTP request to a
server. When you copy a configuration file from the switch to a server by using FTP, the Cisco IOS
software sends the first valid username in this list:
•
•
•
The switch sends the first valid password in this list:
•
•
•
The username and password must be associated with an account on the FTP server. If you are writing to
the server, the FTP server must be properly configured to accept your FTP write request.
Use the ip ftp username and ip ftp password commands to specify a username and password for all
copies. Include the username in the copy command if you want to specify only a username for that copy
operation.
If the server has a directory structure, the configuration file is written to or copied from the directory
associated with the username on the server. For example, if the configuration file resides in the home
directory of a user on the server, specify that user's name as the remote username.
For more information, refer to the documentation for your FTP server.
This section includes this information:
•
•
•

Preparing to Download or Upload a Configuration File By Using FTP

Before you begin downloading or uploading a configuration file by using FTP, do these tasks:
•
•
Catalyst 3750 Metro Switch Software Configuration Guide
B-12
Appendix B
The username specified in the copy command if a username is specified.
The username set by the ip ftp username username global configuration command if the command
is configured.
Anonymous.
The password specified in the copy command if a password is specified.
The password set by the ip ftp password password global configuration command if the command
is configured.
The switch forms a password named username@switchname.domain. The variable username is the
username associated with the current session, switchname is the configured host name, and domain
is the domain of the switch.
Preparing to Download or Upload a Configuration File By Using FTP, page B-12
Downloading a Configuration File By Using FTP, page B-13
Uploading a Configuration File By Using FTP, page B-14
Ensure that the switch has a route to the FTP server. The switch and the FTP server must be in the
same subnetwork if you do not have a router to route traffic between subnets. Check connectivity to
the FTP server by using the ping command.
If you are accessing the switch through the console or a Telnet session and you do not have a valid
username, make sure that the current FTP username is the one that you want to use for the FTP
download. You can enter the show users privileged EXEC command to view the valid username. If
you do not want to use this username, create a new FTP username by using the ip ftp username
username global configuration command during all copy operations. The new username is stored in
Working with the Cisco IOS File System, Configuration Files, and Software Images
78-15870-01