Creating A Tar File; Displaying The Contents Of A Tar File - Cisco Catalyst 3750 Software Configuration Manual

Working with the Flash File System

Creating a tar File

To create a tar file and write files into it, use this privileged EXEC command:
archive tar /create destination-url flash:/file-url
For destination-url, specify the destination URL alias for the local or network file system and the name
of the tar file to create. These options are supported:
•
•
•
•
The tar-filename.tar is the tar file to be created.
For flash:/file-url, specify the location on the local flash file system from which the new tar file is
created. You can also specify an optional list of files or directories within the source directory to write
to the new tar file. If none are specified, all files and directories at this level are written to the newly
created tar file.
This example shows how to create a tar file. This command writes the contents of the new-configs
directory on the local flash device to a file named saved.tar on the TFTP server at 172.20.10.30:
Switch# archive tar /create tftp:172.20.10.30/saved.tar flash:/new-configs

Displaying the Contents of a tar File

To display the contents of a tar file on the screen, use this privileged EXEC command:
archive tar /table source-url
For source-url, specify the source URL alias for the local or network file system. These options are
supported:
•
•
•
•
The tar-filename.tar is the tar file to display.
You can also limit the display of the files by specifying an optional list of files or directories after the tar
file; then only those files appear. If none are specified, all files and directories appear.
This example shows how to display the contents of a switch tar file that is in flash memory:
Switch# archive tar /table flash:image-tv0-m.tar
info (219 bytes)
image-tv0-mz-121/ (directory)
image-tv0-mz-121/html/ (directory)
image-tv0-mz-121/html/foo.html (0 bytes)
image-tv0-mz-121/image-tv0-mz-121.bin (610856 bytes)
image-tv0-mz-121/info (219 bytes)
info.ver (219 bytes)
Catalyst 3750 Metro Switch Software Configuration Guide
B-6
Appendix B
For the local flash file system, the syntax is
flash:
For the FTP, the syntax is ftp:[[//username[:password]@location]/directory]/tar-filename.tar
For the RCP, the syntax is rcp:[[//username@location]/directory]/tar-filename.tar
For the TFTP, the syntax is tftp:[[//location]/directory]/tar-filename.tar
For the local flash file system, the syntax is
flash:
For the FTP, the syntax is ftp:[[//username[:password]@location]/directory]/tar-filename.tar
For the RCP, the syntax is rcp:[[//username@location]/directory]/tar-filename.tar
For the TFTP, the syntax is tftp:[[//location]/directory]/tar-filename.tar
Working with the Cisco IOS File System, Configuration Files, and Software Images
78-15870-01