Measuring The Unloaded Rear Wheel Sag - Husqvarna 701 Enduro 2017 Owner's Manual

11 TUNING THE CHASSIS
11.8

Measuring the unloaded rear wheel sag

–
Turn adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the shock absorber
type.
Guideline
Rebound damping
Standard
Info
S01000-10 Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
– Measure the distance – as vertical as possible – between the rear axle and a fixed
point, for example, a mark on the rear fairing.
0 0 A A
–
Note down the value as dimension
400988-10
Finishing work
–
Remove the motorcycle from the lift stand. (

clockwise up to the last perceptible click.
15 clicks
p. 77)

.
p. 77)
69