Adjusting The Basic Position Of The Hand Brake Lever; Checking The Brake Discs - Husqvarna 701 Enduro 2017 Owner's Manual

13 BRAKE SYSTEM
13.2

Adjusting the basic position of the hand brake lever

13.3

Checking the brake discs

Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
–
Adjust the basic position of the hand brake lever to your hand size by turning adjust-

ing wheel
Info
Push the hand brake lever forward and turn the adjusting wheel.
Do not make any adjustments while riding.
S01045-10
–
Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
Info
Wear will reduce the thickness of the brake disc at the contact surface
the brake linings.
Brake discs - wear limit
Front
400406-10
.

.
4.5 mm (0.177 in)
105

of