Adjusting The Steering Head Bearing Play - Husqvarna 701 Enduro 2017 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.8

Adjusting the steering head bearing play

Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid stresses.
–
Tighten screws
Guideline
V00506-12
Screw, top triple clamp
–
Mount and tighten screw
Guideline
Screw, steering stem
Finishing work
–
Check the play of the steering head bearing. (
p. 77)
 
. Remove screw .

.

.

.
M20x1.5 12 Nm (8.9 lbf ft)
M8 17 Nm (12.5 lbf ft)
M8 20 Nm (14.8 lbf ft)
p. 81)
82