Husqvarna 701 Enduro 2017 Owner's Manual page 98

12 SERVICE WORK ON THE CHASSIS
–
Check the chain sliding piece for wear.
» If the lower edge of the chain pins is in line with or below the chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
–
Tighten the screw on the chain sliding piece.
Guideline
Screw, chain sliding piece
S01040-10
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
400985-01
M8 15 Nm
(11.1 lbf ft)
96