Removing The Front Fender; Installing The Front Fender - Husqvarna 701 Enduro 2017 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.13

Removing the front fender

12.14

Installing the front fender

Preparatory work
–
Switch off the ignition by turning the ignition key to the OFF
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Remove screws
S01037-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Mount and tighten screws
Guideline
Remaining screws, chassis
S01037-11
Finishing work
–
Install the headlight mask with the headlight. (

.
 and take off the fender.

.
position.
p. 148)

.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 150)
85