11
TUNING THE CHASSIS
11.13
Handlebar position
11.14
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
–
Fit the rear fairing.
–
Install the air filter box.
–
Mount the side cover. (
–
Mount the seat. (
–
Remove the motorcycle from the work stand.
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
The holes on the handlebar support are placed at a distance of
Hole distance
The handlebar can be mounted in 2 different positions. In this way, the handlebar can be
mounted in the most comfortable position for the rider.
V00495-10
p. 84)
p. 83)
3.5 mm (0.138 in)
p. 70)
p. 68)
from the center.
75