Checking The Rear Brake Fluid Level - Husqvarna 701 Enduro 2017 Owner's Manual

13 BRAKE SYSTEM
13.10

Checking the rear brake fluid level

Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the MIN marking, the brake system is leaking or the brake linings are worn down.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized Husqvarna Motorcycles
workshop will be glad to help.)
–
Loosen fittings
–
To adjust the basic position of the foot brake lever to individual requirements, loosen
nut  and turn screw
Info
The range of adjustment is limited. The screw must be screwed into the
footrest bracket by at least four turns.
–
Position foot brake cylinder
travel.
–
Tighten fitting
Guideline
Screw connection, foot brake cylinder
–
Check the free travel of the foot brake lever. (
–
Tighten nut
S01052-10

on foot brake cylinder
 accordingly.

so that the foot brake lever has the necessary free

.

.

.
M6 10 Nm (7.4 lbf ft)
p. 113)
115