Husqvarna 701 Enduro 2017 Owner's Manual page 97

12 SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear.
» If the lower edge of the chain pins is in line with or below the chain sliding guard:
–
Replace the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain sliding
guard
V00513-10
M6 8 Nm
(5.9 lbf ft)
95
Loctite ® 243™