11
TUNING THE CHASSIS
11.12
Adjusting the riding sag
–
Remove the motorcycle from the work stand.
Preparatory work
–
Raise the motorcycle with the work stand.
–
Remove the seat. (
–
Take off the side cover. (
–
Remove the air filter box.
–
Remove the rear fairing.
–
Remove the rear left side cover.
–
Remove the rear right side cover.
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Medium (standard)
Info
The spring rate is shown on the outside of the spring.
B00292-10
Finishing work
–
Install the shock absorber.
–
Install the rear right side cover.
–
Install the rear left side cover.
p. 83)
p. 84)
69 N/mm (394 lb/in)
74