Adjusting The Basic Position Of The Foot Brake Lever - Husqvarna 701 Enduro 2017 Owner's Manual

13 BRAKE SYSTEM
13.9

Adjusting the basic position of the foot brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
Move the foot brake lever back and forth between the end stop and the contact to the
foot brake cylinder piston and check free travel
Guideline
Free travel at foot brake lever
Info
You will know that contact has been made with the foot brake cylinder piston
when there is increased resistance when you activate the foot brake lever.
402027-10
» If the free travel does not meet specifications:
–
Adjust the basic position of the foot brake lever.

.
3... 5 mm (0.12... 0.2 in)
( p. 114)
114