Removing The Engine Guard - Husqvarna 701 Enduro 2017 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.25

Removing the engine guard

–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level
» If the fluid level does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 (
V00501-10
–
Position the cover with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately with water.
–
Remove screws
–
Pull the engine guard forward out of the holders and remove it.
S01036-10

.
 
with membrane .

below container rim
p. 200)

on the left and right.
4 mm (0.16 in)
101