Adjusting Basic Position Of Clutch Lever - Husqvarna 701 Enduro 2017 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.23

Adjusting basic position of clutch lever

Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting

screw .
–
When adjusting the clutch lever, make sure to leave a minimum clearance to other
parts of the vehicle.
Guideline
Minimum clearance
S01043-10
5 mm (0.2 in)
99