Husqvarna 701 Enduro 2017 Owner's Manual page 75

11 TUNING THE CHASSIS
Main work
–
Loosen retaining ring
–
Turn adjusting ring
Hook wrench (T106S)
–
Measure the overall spring length while the spring is not under tension.
–
Tighten the spring by turning adjusting ring
Guideline
Spring preload
Info
Depending on the static sag and/or the riding sag, it may be necessary to
increase or decrease the spring preload.
–
Tighten retaining ring
402746-10
Finishing work
–
Install the shock absorber.
–
Install the rear right side cover.
–
Install the rear left side cover.
–
Fit the rear fairing.
–
Install the air filter box.
–
Mount the side cover. (
–
Mount the seat. (
 .

until the spring is no longer under tension.

22 mm (0.87 in)
 .
p. 84)
p. 83)
to the specified measurement.
73