Husqvarna 701 Enduro 2017 Owner's Manual page 168

17 TUNING THE ENGINE
–
Clean gear teeth
–
Mount shift lever
ing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
–
Mount and tighten screw
401951-10
Guideline
Screw, shift lever

of the shift lever and shift shaft.

on the shift shaft in the required position and engage the gear-

with the washers.
M6 14 Nm Loctite ® 243™
(10.3 lbf ft)
166