Rear Seat Conversion (Sxs1000M5P/M5D Only) - Honda PIONEER 2022 Owner's Manual

Rear Seat Conversion (SXS1000M5P/M5D only)

Unfolding
1. Park your Honda SXS on a firm, level surface, and roll up the rear
side nets (page 71).
2. Open the rear door (page 63).
3. Lift up the rear seat back until it latches into position.
4. Unhook the strap ring from the stay.
5. Fold down the lower seat back and push it to snap the tabs into
slots.
Do not open the rear doors while the cargo bed is raised. Opening
the rear doors while the cargo bed is raised may cause the seats to
flip up unexpectedly.
Fold up the rear seats only while the cargo bed is in the lowered
position.
strap ring
stay
seat back tab
lower seat back
slot
Instruments & Controls
Seat
73