Cooling system
•
Remove the water pump with the help
of a square screwdriver.
REFITTING
•
Upon refitting follow the removal steps but in reverse order, paying special attention to the
alignment of the water pump control wheel, which must be aligned with the reference on the
crankcase when refitting.
Removing the radiator
•
Remove both front side fairings.
•
Place a container of suitable capacity
underneath the sleeve.
•
Release the clamp.
•
Slide off the sleeve.
•
Empty the liquid into the container.
•
Open the radiator cap to facilitate
drainage.
COOL SYS - 196
RX SX 125