Bodywork
Seat
•
Place the vehicle on the service stand.
•
Insert the key in the lock.
•
Turn the key anticlockwise.
•
Lift and remove the saddle.
UPON REFITTING:
BEFORE LOWERING AND LOCKING THE SADDLE,
CHECK THAT THE KEY HAS NOT BEEN LEFT INSIDE THE
GLOVE-BOX / TOOLKIT COMPARTMENT.
•
Fit the saddle making sure to position
the corresponding rear hooks correct-
ly.
•
Lower and press the saddle to trip the
lock.
BEFORE RIDING, MAKE SURE THAT THE SADDLE IS
CORRECTLY LOCKED INTO POSITION.
Headlight assy.
•
Undo and remove both screws on the
upper plate.
•
Undo and remove the two screws fas-
tening the mudguard and collect the
nuts and washers from the bottom.
BODYW - 200
RX SX 125