Engine
•
Fit the protection sleeve on the crank-
shaft thread.
•
Insert the long threaded end of the ex-
tractor screw in the extractor plate and
remove the flywheel.
Removing the stator
•
Undo and remove the three M6 stator
fixing screws.
•
Remove the stator, the cable guide and
external locking.
•
Remove the woodruff key from the
crankshaft.
Installing the flywheel
•
Degrease the crankshaft conic part
and the flywheel.
•
Place the flywheel matching the
grooves on the shaft.
•
Place the washer and the magneto fly-
wheel fixing screw without tightening it.
•
Place the flywheel up to the TDC
ENG - 98
RX SX 125