APRILIA SX 125 Service Station Manual page 151

RX SX 125
•
Remove the snap ring inside the
sleeve using a thin screwdriver.
•
With a thick plain slot screwdriver re-
move the sealing ring from its seat
carefully and operate at several points
in one third of its circumference without
damaging the oil seal and the sleeve
rim.
•
To take out the sliding bushings and
the plastic spacer hit the sleeve end
hard on a wooden surface, keeping the
sleeve perpendicular to the surface.
•
To take out the sliding bushings and
the plastic spacer hit the sleeve end
hard on a wooden surface, keeping the
sleeve perpendicular to the surface.
Suspensions
SUSP - 151