Suspensions
•
Drain again all the oil inside the stem.
Disassembling the fork
CAUTION
THE FOLLOWING OPERATIONS REFER TO A SINGLE WHEEL HOLDER STEM / SLEEVE BUT
APPLY TO BOTH.
•
Screw the stem, on the foot side, with
a vice fitted with protection jaws to
avoid damaging it.
•
Loosen the fixing screw and remove
the guide of the stem cover.
•
Hold the sleeve and firmly slide it off the
stem.
•
Screw the sleeve in a vice fitted with
protection jaws so as to avoid dam-
ages.
•
With a plain slot screwdriver remove
the dust guard, being careful not to
damage the sleeve rim.
•
The dust guards removed can not be
reused.
SUSP - 150
RX SX 125