RX SX 125
•
Lift the fuel tank without removing it.
•
Remove the clamp.
•
Disconnect the oil level probe connec-
tors.
•
Place a container of suitable capacity
underneath the vehicle.
•
Loosen the clamp and drain the reser-
voir in the container.
REFITTING
EACH TIME THE MIX OIL RESERVOIR IS DRAINED, REFILL AND BLEED.
•
Mount the mix oil reservoir following
the same removal procedure but in re-
verse order.
•
Undo and remove the three pump
screws on the LHS of the vehicle and
remove the cover.
•
Remove the bleed screw indicated.
•
Pour oil in the reservoir until air bubbles
are no longer formed in the pipe.
Bodywork
BODYW - 211